Test & Measurement Misc > NH Research > Batteries and Power Supplies
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
NHR CAL300 Calibrator Request for Availablility
NHR CAL300 Calibrator, 10A, 30A, 300A, 25 lbs, Calibration Instrument
Need an Official Quote?
NH Research CAL300 Calibrator
The NH Research CAL300 Calibrator is a specially designed device made to increase the efficiency of the calibration process for a range of NHR products. It makes automatic calibration easy to use, especially for engineers and staff without a lot of calibration knowledge. The device can efficiently produce accurate calibration results, often within two to three hours. The CAL300 is used in conjunction with an 8½-digit digital multimeter (DMM) that is given by the user, such as the Agilent/Keysight 3458A or a comparable type. Depending on which particular product family is being calibrated, more DC sources or a power resistor box might be needed for a thorough calibration.
A range of NHR products are supported by the device, such as the 9200/9300 Battery Test Systems and the 4700, 4760, and 4300 DC Loads. For accurate calibration of the latter, an NHR Resistive Load Box is necessary. The CAL300's design prioritizes speedy outcomes and ease of usage. The calibration process is made easier by its graphical, interactive application. Users are guided through the connection and calibration procedures by this user-friendly program, which is part of the program package that is supplied. Users can easily manage their data and retain records by saving the calibration data directly to a file or flash disk after the calibration process is complete.
This calibrator can measure AC and DC current; its ranges are 10, 30, and 300A for AC current and 12, 30, and 400A for DC current. It also includes measurements of low-power resistance in the 300 Ω, 3.3 kΩ, and 33 kΩ levels. It offers +2.7 V and -2.7 V references for low-voltage reference applications. The NH Research CAL300 weighs 25 pounds and has dimensions of 5⅓ inches by 17 inches by 14⅓ inches. It needs twenty minutes to warm up and operates between 23°C and 5°C in temperature. By using a switch, the user can choose between the device's broad electrical input range of 90-132 VAC or 180-264 VAC.
The CAL300 is compatible with current networked systems since it uses NHR CAL Software for software control and interacts via LAN utilizing SCPI or VXI-11 protocols.
| Model Name | NH Research CAL300 Calibrator |
|---|---|
| Part Type | Calibration Instrument |
| AC Current Ranges | 10A, 30A, 300A |
| DC Current Ranges | 12A, 30A, 400A |
| Low-Power Resistance | 300 Ω, 3.3 kΩ, 33 kΩ |
| Low-Voltage Reference | +2.7 V and -2.7 V |
| Physical Dimensions | 5⅓" H x 17" W x 14⅓" D |
| Weight | 25 lbs |
| Operating Temperature | 23°C ± 5°C |
| Power Supply | 90-132 VAC or 180-264 VAC, switchable |
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
NHR CAL300 Calibrator
Test & Measurement Misc > NH Research > Batteries and Power Supplies
NHR CAL300 Calibrator, 10A, 30A, 300A, 25 lbs, Calibration Instrument
1-800-915-6216
- Description
- Technical Specifications
NH Research CAL300 Calibrator
The NH Research CAL300 Calibrator is a specially designed device made to increase the efficiency of the calibration process for a range of NHR products. It makes automatic calibration easy to use, especially for engineers and staff without a lot of calibration knowledge. The device can efficiently produce accurate calibration results, often within two to three hours. The CAL300 is used in conjunction with an 8½-digit digital multimeter (DMM) that is given by the user, such as the Agilent/Keysight 3458A or a comparable type. Depending on which particular product family is being calibrated, more DC sources or a power resistor box might be needed for a thorough calibration.
A range of NHR products are supported by the device, such as the 9200/9300 Battery Test Systems and the 4700, 4760, and 4300 DC Loads. For accurate calibration of the latter, an NHR Resistive Load Box is necessary. The CAL300's design prioritizes speedy outcomes and ease of usage. The calibration process is made easier by its graphical, interactive application. Users are guided through the connection and calibration procedures by this user-friendly program, which is part of the program package that is supplied. Users can easily manage their data and retain records by saving the calibration data directly to a file or flash disk after the calibration process is complete.
This calibrator can measure AC and DC current; its ranges are 10, 30, and 300A for AC current and 12, 30, and 400A for DC current. It also includes measurements of low-power resistance in the 300 Ω, 3.3 kΩ, and 33 kΩ levels. It offers +2.7 V and -2.7 V references for low-voltage reference applications. The NH Research CAL300 weighs 25 pounds and has dimensions of 5⅓ inches by 17 inches by 14⅓ inches. It needs twenty minutes to warm up and operates between 23°C and 5°C in temperature. By using a switch, the user can choose between the device's broad electrical input range of 90-132 VAC or 180-264 VAC.
The CAL300 is compatible with current networked systems since it uses NHR CAL Software for software control and interacts via LAN utilizing SCPI or VXI-11 protocols.
| Model Name | NH Research CAL300 Calibrator |
|---|---|
| Part Type | Calibration Instrument |
| AC Current Ranges | 10A, 30A, 300A |
| DC Current Ranges | 12A, 30A, 400A |
| Low-Power Resistance | 300 Ω, 3.3 kΩ, 33 kΩ |
| Low-Voltage Reference | +2.7 V and -2.7 V |
| Physical Dimensions | 5⅓" H x 17" W x 14⅓" D |
| Weight | 25 lbs |
| Operating Temperature | 23°C ± 5°C |
| Power Supply | 90-132 VAC or 180-264 VAC, switchable |
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
